Planning11 min read · · updated

Exhibiting at Paris Nord Villepinte: an exhibitor's guide

Halls and ceiling heights, RER B and A104 access, exhibitor parking, Logipass, build-up rules, Viparis orders, nearby hotels and the show calendar: what international exhibitors need to know, from a stand builder based next to the venue.

Scaffolding in an exhibition hall during build-up

Paris Nord Villepinte sits between Paris and Charles de Gaulle airport. Viparis, which runs the venue, lists 250,000 m² of modular indoor space across 9 halls, and SIAL Paris, Euronaval, Maison&Objet, JEC World, INTERMAT and Milipol Paris all take place there. It is also our home ground: our offices are in Villepinte, next to the venue, and we know its technical rules well.

Flying in to exhibit? Below is what you need to settle before a stand goes up there: the halls, access, deliveries, orders, hotels, the show calendar and budgets. The practical details come from the official Viparis pages, checked on 26 October 2026. Where your organiser’s exhibitor manual says something different, the manual wins.

Paris Nord Villepinte at a glance

  • Address: ZAC Paris Nord 2, 93420 Villepinte, France.
  • Space: 250,000 m² of modular indoor space and 360,000 m² outdoors. Seven halls are connected by a welcome gallery and two stand on their own. The venue also has 2 amphitheatres, with up to 628 seats, and 38 meeting rooms.
  • Location: about 15 minutes from Paris Charles de Gaulle airport and about 30 minutes from central Paris, according to Viparis.
  • Access: RER B, Parc des Expositions station. By car, exhibitors use exit 1 from the A104 motorway.

The halls: floor space and ceiling heights

Hall Total area Maximum ceiling height Worth knowing
Hall 1 16,455 m² 9 m Mezzanine and meeting rooms, linked to Hall 2
Hall 2 16,389 m² 9 m Mezzanine and meeting rooms, linked to Hall 1
Hall 3 19,347 m² 9 m Mezzanine and meeting rooms, linked to Hall 4
Hall 4 19,316 m² 9 m, 12 m or 15 m Near Conference Centre 4 Jean Thèves (628-seat amphitheatre)
Hall 5A 49,734 m² 9 m Central hall linked to Halls 4, 5B and 6, with an indoor patio
Hall 5B 26,611 m² 9 m No pillars, can be divided, stands alone or connects through Hall 5A
Hall 6 46,598 m² 9 m Two entrances (gallery side or car park side), shop and food area
Hall 7 34,065 m² 9 m High Environmental Quality (HQE) certified, few pillars
Hall 8 15,000 m² 9 m or 12 m Can be divided, stands alone, closest to the RER station

Source: Viparis, Paris Nord Villepinte spaces page.

Check two things before any design work. First, the hall’s ceiling height is not your stand’s height limit. That limit comes from your show’s stand construction rules, in the exhibitor manual, and it can change from one show to the next in the same hall. Second, pillars. A hall with none, like 5B, or very few, like 7, leaves a large stand far more freedom. Anywhere else, look at the hall plan and make sure no pillar lands inside your space before you sign off the 3D design.

Getting to Paris Nord Villepinte

By RER B

Take RER line B towards Paris Charles de Gaulle airport and get off at Parc des Expositions. If your stand is in Hall 8, you are as close to the station as it gets.

By car: exit 1 for exhibitors

The venue has separate entrances for visitors and exhibitors:

  • Exhibitors: exit 1 from the A104, then the exhibitor car park set for your event.
  • Visitors: exit 2 from the A104, then car parks P1, P2 or P3, as directed by the staff on site.

Viparis lists these parking rates: €0.80 per 15 minutes for the first 6 hours, €20 from the 7th to the 24th hour, then €20 for each additional 24 hours. A lost ticket costs €20 per 24 hours.

From the airports

  • From Paris Charles de Gaulle: 10 minutes by taxi, or the RER B towards Saint-Rémy-lès-Chevreuse to Parc des Expositions.
  • From Paris Orly: about 1 hour by taxi, or Orlyval to Antony, then the RER B towards Aéroport Charles de Gaulle to Parc des Expositions.

Line 17 and accessibility

Line 17 of the Grand Paris Express, which will link Saint-Denis Pleyel to Le Mesnil-Amelot, will get a new elevated station at the venue. Announced for 2028, its opening was pushed back to autumn 2029 by the Société des grands projets in September 2026. According to Viparis, the venue will then be 7 minutes from Le Bourget airport and 16 minutes from Saint-Denis Pleyel. For visitors with reduced mobility, a shuttle and escort service runs from the visitor car parks once the venue opens to the public, for the visitor and two companions, and a step-free route covers the whole site.

Deliveries and build-up: Logipass and the Viparis rules

Every vehicle that drives into the loading and unloading areas must be registered on Logipass, the Viparis platform. Turn up without it and you may be refused entry. At Paris Nord Villepinte, the rule covers the delivery areas and the exhibitor car parks during build-up, dismantling and deliveries while the show is open.

  1. Create an account on logipass.viparis.com, then file one request per vehicle.
  2. Give an estimated arrival time. The time allowed in the delivery area is set automatically by vehicle type (car, van or heavy goods vehicle) and varies from one Viparis venue to another. The number plate can be changed until you arrive.
  3. Print your vehicle pass as a PDF once the approval email arrives.
  4. Don’t forget dismantling: it needs its own request, and the Duplicate button saves you typing everything again.

Unload, then move on: parking in the delivery areas is limited to the time needed to unload, after which vehicles go to the exhibitor or visitor car parks open during build-up and dismantling. For questions, the Logipass hotline is on +33 1 40 68 11 30.

What Viparis says about build-up and dismantling

  • The order of build-up: space-only stands are built first, then shell scheme stands, and finally exhibitors arrive to take over their stand, receive deliveries and test the services they ordered.
  • Parcels: Viparis staff are not authorised to accept your deliveries, such as boxes of brochures. Have them delivered while someone from your team is on the stand.
  • Dismantling starts when the event ends, at the times set by the organiser. Dismantling earlier is forbidden, for safety reasons.

Our way of working follows from these rules. For a show in France, we build and pre-assemble your stand in our own 1,500 m² workshop in the Paris region, then deliver it inside the Logipass slot. On site, our crews rebuild it, set the lighting and screens, and hand it over once the technical check is done. And because our offices are in Villepinte, a team can be in your hall within minutes, during build-up and during the show.

Your show’s exhibitor manual comes first

Build-up, opening and dismantling times change from show to show, and you will find them in the exhibitor manual your organiser sends. Viparis recommends reading it before anything else: it holds the schedule, the deadlines, the checklists, the official contractors, the stand types and the stand construction rules. Badges are booked with the organiser too.

Four points in that manual shape your stand:

  • Height and setbacks, set by the stand construction rules, to compare with the ceiling height of your hall.
  • The services plan: Viparis asks for a dimensioned, oriented sketch of your stand with the aisles and neighbouring stands, the stand number, your company name and the position of each service ordered (power, rigging points). For rigging, add the height and the total weight. Without this plan, services are installed following the Viparis standard rules, and moving them on site is charged.
  • Electricity: power comes from a distribution box, through the floor or the ceiling depending on the venue. The box you order depends on the power of your equipment.
  • Deadlines: plan submission, orders, badges. Our trade show planning timeline places them in a full schedule, from six months out to the post-show review.

Ordering power and services: Viparis Store

The venue’s technical services are ordered on Viparis Store: power connections, internet, rigging points for suspended structures, furniture. What to know:

  • Orders are online only, as soon as your event’s catalogue is published. No phone or paper orders.
  • Commercial approval comes within 72 hours. Technical approval can take longer.
  • After the order deadline, prices go up by 20%: that is the crossed-out price shown next to the item.
  • Payment is by cheque, bank transfer or card. Cash is no longer accepted.

During build-up, the Viparis Exhibitor Service (+33 1 40 68 16 16) is on site for last-minute orders where possible, parking spaces and payment of outstanding orders. Contractors selected by Viparis are also on site, for suspended structures, power and internet among others.

Budget for them separately: these services, like the floor space itself, are not included in the price of a stand. We prepare the orders with you from the stand drawings (power, rigging points, position of the distribution box), so you know what to order and by when.

Food, meetings and hotels around the venue

On site, Viparis mentions a steakhouse, Hippopotamus, and Fauchon products among its food offer, and Hall 6 has its own shop and food area. To host guests on your stand, Viparis works with a list of approved caterers, including Lenôtre and Potel et Chabot.

For a meeting or a press conference, the venue has 2 amphitheatres, including the 628-seat Conference Centre 4 Jean Thèves near Hall 4, and 38 meeting rooms. Meeting Centre 5, with 18 rooms, and Reception Area 5 are close to Hall 5A.

Hosting clients in the evening? We design and produce corporate parties and gala dinners, with the same project manager as for your stand. Budget €120 to €700 excl. VAT per guest with us, excluding venue hire and catering, plus a project fee of €8,000 excl. VAT, for projects from about €15k excl. VAT.

Where to stay: Viparis lists plenty of hotels around the venue, from the ibis Villepinte Parc des Expositions to the Novotel Suites Paris CDG Airport Villepinte, and more towards Roissy. Book once your participation is confirmed, not later. With the RER B, a hotel in central Paris is a workable choice too.

Trade show calendar at Paris Nord Villepinte

The next editions in our calendar, with the ideal date to start a custom stand (16 weeks before opening):

Show Industry Next edition Start a custom stand by
Maison&Objet Interiors, design, hospitality 14 to 18 January 2027 Short lead time: premium modular
Première Vision Fashion 26 to 28 January 2027 Short lead time: premium modular
JEC World Composites, industry 2 to 4 March 2027 Ideal date passed: start now (a premium modular stand is still possible in 6 to 8 weeks)
INTERMAT Construction, industry 21 to 24 April 2027 30 December 2026
SILMO Paris Optics, eyewear September 2027, dates to be confirmed Depends on the dates
Milipol Paris Homeland security, defence 16 to 19 November 2027 27 July 2027
WNE Nuclear energy 7 to 9 December 2027 17 August 2027
Eurosatory Defence 19 to 23 June 2028 28 February 2028

The venue also hosts SIAL Paris and Euronaval. Up-to-date dates, month by month, are on our Paris Nord Villepinte trade show calendar, and each show page gives a planning timeline based on its next edition. Missed the start date, or less than 10 weeks to go? A premium modular stand is still possible, with 6 to 8 weeks at the very least.

How much does a stand at Paris Nord Villepinte cost?

The price of a stand depends on its size, type and finish, not on the venue. Our estimator gives these ranges, including design, build, transport, build-up and dismantling:

Stand Estimate
18 m², premium modular, Premium finish €10k to €13k excl. VAT
36 m², custom build, Prestige finish €33k to €48k excl. VAT
100 m², custom build, Prestige finish €88k to €128k excl. VAT

These figures exclude floor space and the services ordered from the organiser and Viparis (power, rigging, internet), and come before any industry uplift. For a defence show such as Milipol Paris or Eurosatory, the 36 m² custom stand comes to €38k to €54k excl. VAT. Our projects start at €5k excl. VAT. For your own floor space, try our stand cost calculator, and our guide to exhibition stand costs in France breaks the budget down line by line.

Your stand builder next to the venue

Exhibiting at Paris Nord Villepinte with a stand builder based next door means:

  • A team minutes from your hall, during build-up, the show and dismantling.
  • The venue’s technical rules already known: Logipass, Viparis orders, services plan, hall constraints.
  • One project manager for the stand and, if you host guests, for the evening event.
  • English-speaking project managers, from the brief to dismantling.

Since 2013, we have delivered more than 420 projects. We work on 48 trade shows a year, and 75% of our clients come back from one edition to the next. To see how we run a project end to end, read our case study on Groupe Novi at TFWA in Cannes. If you are still comparing contractors, our guide on how to choose an exhibition stand builder in France gives the questions worth asking, and our guide for international exhibitors covers customs, shipping and lead times. Also exhibiting in Paris itself? Read our guide to exhibiting at Paris Expo Porte de Versailles.

Exhibiting at Paris Nord Villepinte? Tell us about your show and your floor space: an English-speaking project manager replies within two working days to match the quote and the schedule to your dates.

Frequently asked questions

How do I get to Paris Nord Villepinte from Charles de Gaulle airport?

From Charles de Gaulle, Viparis gives two options: a taxi, about 10 minutes, or the RER B towards Saint-Rémy-lès-Chevreuse to Parc des Expositions station. From Paris, it is the same line in the other direction, towards Charles de Gaulle airport, to the same station. From Orly, Viparis suggests about an hour by taxi, or Orlyval to Antony and then the RER B towards Aéroport Charles de Gaulle. Hall 8 is the hall nearest the station.

Where do exhibitors park at Paris Nord Villepinte?

Exhibitors leave the A104 motorway at exit 1 and follow the signs to the exhibitor car park assigned to their event. Visitors use exit 2 and car parks P1, P2 or P3. Viparis lists €0.80 per 15 minutes for the first 6 hours, €20 from the 7th to the 24th hour, then €20 for each additional 24 hours. Driving into the delivery areas is a separate matter: every vehicle has to be registered on Logipass first.

Do I need Logipass to deliver my stand?

Yes. Viparis makes Logipass registration compulsory for every vehicle entering the loading and unloading areas, and warns that a vehicle without it may be turned away. The rule covers build-up, dismantling and deliveries while the show is open. You file one request per vehicle with an estimated arrival time, then print the pass Viparis sends back. If we build your stand, registering our vehicles is our job, not yours.

How high can my stand be at Paris Nord Villepinte?

Most halls have a 9 m ceiling, according to Viparis, with areas at 12 m or 15 m in Hall 4 and 12 m in Hall 8. That is the building, though, not your stand. Your stand's maximum height comes from your show's stand construction rules, in the exhibitor manual, and two shows in the same hall can set different limits. We check it at the brief, before anyone draws the 3D design.

Which hotels are close to Paris Nord Villepinte?

Viparis lists hotels around the venue, including the ibis Villepinte Parc des Expositions, the ibis Styles Parc des Expositions de Villepinte, the Campanile Villepinte Parc des Expositions, the Novotel Suites Paris CDG Airport Villepinte and the Hyatt Place Paris Charles de Gaulle Airport, with more towards Roissy. Book as soon as your participation is confirmed. And since the RER B runs straight to the venue, a hotel in central Paris works too.

A trade show, a launch, an event in France?

Your next trade show deserves a standing ovation.

Tell us about your project in two minutes. An English-speaking project manager gets back to you within 48 h (business days) with a first creative and budget approach.

Request a quote

Before you leave the stage…

  • Stands · events · showrooms
  • From €5k excl. VAT
  • Reply within 48 h

Get your free estimate.

Project, industry, first name, email: that is all. An English-speaking project manager sends you a budget range and creative ideas within 48 h.

Tell us about your project.

Choose your industry.

Required field.

Enter a valid email address.

Prefer to talk? +33 6 08 54 12 63 · WhatsApp